CRESTRON DM-NAX-16AIN DM NAX Audio-over-IP Network Encoder with 16 Stereo Inputs
Specifications
| All Returns Accepted | ReturnsNotAccepted |
| Brand | Crestron |
| Model | M201845005 |
AudioInput Signal Types8 stereo unbalanced analog (RCA) includes (4) 5-pin phoenix balanced connector;8 digital SPDIF (4 TOSLINK® and 4 Coaxial)Source Compensation±10.0 dB per inputInput MonitoringSource Signal DetectTHD0.002%S/N Ratio110 dB digital in, 108 dB analog inFrequency Response20 Hz to 20 kHz (±0.6 dB)Supported Sample RatesCoaxial: Up to 192 kHz;Optical: 192 kHzCommunicationsEthernetFor control, AoIP, and or console, 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCPUSBFor configuration managementConnectorsANALOG SOURCES L/R1 – 8(8) RCA female comprising (4) unbalanced stereo line-level audio inputs;(4) 5-pin phoenix balanced connectorInput Impedance: 10k Ohms;Maximum Input Level: 2 VrmsSPDIF SOURCES 9 – 12(4) JIS F05 female (TOSLINK) optical fiber connector;S/PDIF optical digital audio inputSPDIF SOURCES 13 – 16(4) RCA female;S/PDIF coaxial digital audio inputs;Input Impedance: 75 OhmsEthernet 1(1) 8-wire RJ45 female;100Base-T/1000Base-TX Ethernet portEthernet 2(1) 8-wire RJ45 female;100Base-T/1000Base-TX Ethernet portUSB(1) USB Type B connector, female;USB computer console port (cable included);For setup only100-240V~50/60Hz Universal AC(1) IEC 60320 C14 main power inlet, mates with removable power cord (included)G6-32 screw, chassis ground lugControls and IndicatorsPWR(1) LED. Amber indicates that the device is booting. White indicates that the device is switched on with audio passing. Red indicates that the device is in standby mode. Off indicates that there is no power from the power supply.LAN(1) LED. White indicates that the device is switched on and has a valid IP address. Off indicates that the device is not connected to a network or the IP address is invalid.NAX(1) LED. White indicates that any audio-over-IP traffic is passing in or out of the DM NAX unit (if any audio-over-IP streams are transmitting out of, or being received by the unit, then the NAX LED will illuminate white). Off indicates that no audioover- IP traffic is passing in or out of the DM NAX unit.SOURCE 1-16(16) LEDs. White indicates signal presence on the specified input/source. Red indicates there is a clipping on an analog input or a bitstream issue on a digital input. Off indicates that there is no signal detected on the specified input/source.SETUP(1) LED. Blinking red indicates that a network reset or factory restore has been initiated via the adjacent SETUP button.PowerPower Consumption20 WattsEnvironmentalTemperature32° to 104°F (0° to 40°C)Humidity10% to 90% RH (non-condensing)Heat Dissipation70 BTU/hrConstructionChassisMetal, black and silver finish, vented sidesMounting1 RU rack-mountableDimensionsHeight1.73 in. (32 mm)Width19 in. (483 mm);17.28 in. (439 mm) without rack earsDepth14.46 in. (368 mm) Weight7.39 lb (3.35 kg)ComplianceFCC Part 15 Class B digital device, CE, ETL listedRegulatory ModelM201845005
Related Items
